| |
| |
Model: |
| |
GX200 |
|
| |
 |
|
- 0-20 mA or 4-20 mA signal transfer in the ratio of 1:1
- energy transfer for powering the two-wire converter
- low voltage drop across the module, typically 3.5V
- designed for DIN 35 rail mounting
- conversion accuracy: < 0.2% |
The module is designed to isolate standard current signals,
0 - 20mA, 4 - 20 mA. The supply power is drawn by the module from the input signal. The module can be used to
isolate a two-wire converter, which is powered via the 4 - 20mA signal line. If a 0 - 20mA signal is to be
isolated, the converter load must be ohmic. The isolation is reached by using a transformer. The input DC signal
is chopped to be converted into an AC signal, which is fed into a transformer. It is picked up from the
transformer secondary winding and subsequently demodulated to produce a DC signal. The input circuit is protected
against noise and polarity reversal. It is also protected against current overload, by means of a resettable
thermal cut-out In principle, it is a high-precision DC current transformer. For the same reason, the secondary
circuit must be closed for the current passage through the primary winding. |
Electrical specifications: |
| - operating temperature range: |
-25...+80°C |
| - storage temperature range: |
-40...+ 80°C |
| - maximum supply voltage: |
36V |
| - maximum operating current: |
30mA (200mA fuse) |
| - input: |
0/4-20mA |
| - transfer ratio: |
1:1 |
| - transfer function maximum error: |
< 0,2% |
| - temperature induced error: |
< 0,002%/°C |
| - test voltage: |
4000Vr.m.s. |
| - time constant: |
< 0,1s |
| - weight: |
90g |
| |
|
|
| Type tests: |
Standard type test:
EMC:
Safety: |
to CSN EN 60770-1
to CSN EN 61326-1
assessed acc. to CSN EN 61010-1 |
Voltage drop across the module versus input voltage:
|
| |
|
| Terminal designation: |
| |
1,2...input terminals (2 is +)
3,4...output terminals (4 is +) |
Dimension sketch:
|
 |
Isolating module application variants:
|
1) Two-wire converter isolation |
2) 0 - 20 mA current loop isolation |
 |
 |
Ordering instructions:
Your order should include:
- converter type
- quantity (No. of pieces) |
|
|
Czech version 
Polska verze 
