Products
- stem from stainless steel diameter 4 or 3mm, min. length 15mm
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
- temperature range -10…+400°C
- dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)
- 1 measuring inputs
- 3 outputs
- communication line
- 10 programs
- each program with 15 steps
- real time-clock
- datalogger with 500 measurements
- loop- powered 4..20mA
- input standard unipolar and bipolar signals
- one-range converter
- response time: 1ms
- accuracy 0,2%
- dielectric strength input / output 4kV
- analog current measurement
- rectifier method of measuring the mean value
- average value calibrated to RMS of sine wave
- frequency range 40 … 1000Hz
- conversion accuracy 0,5%
- response time 300ms
- isolation input-output: 4000Vef
- self powered from input current for output 0..20mA
- loop-powered for output 4..20mA
- two-state programmable switch for monitoring of electrical values or temperature
- output relay with changeover contact
- Possibility of easy setting of switching value by potentiometer or programmed
- supply voltage 230V AC ± 10% (45 - 65 Hz) (transformer)
- isolation strength input / output / power 4kV
- DIN rail mounting
- the temperature adjusting element is inside the housing
- converter with galvanic isolation 4000Veff
- it is designed for transduction:
- temperature from any thermocouple with linearization and cold junction compensation
- temperature from RTD or resistance from resistance transmitter
- voltage 0-1V DC
- easy programming by AX-USB adapter (AY-USB)
- power supply 8…30V DC
- DIN 35 rail-mounted design
- programmable converter with galvanic isolation 4000Veff input - output - power supply
- it is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
- communication by RS485 line with master device on baud rate 600..19200Bd
- typically max. 56 transmitters on the line, distance max. 1200m
- communication protocol ASCII or MODBUS-RTU
- 1 measuring inputs
- 3 outputs
- communication line
- 3 independent programs
- max. 10 steps for program
- easy operation
- isolation converter GXN with lightning improved resistance
- one-range converter
- converter provides additional protection lightning arresters and wire resistors in inputs and outputs
- response time: 1ms
- accuracy 0,1%
- power supply 18VDC for loop-powered transmitter on input
- dielectric strength input / output / supply power 4kV
- auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC
- direct analog current measurement up to 100A
- current threaded through
- rectifier method of measuring the mean value
- average value calibrated to RMS of sine wave
- frequency range 40 … 1000Hz
- conversion accuracy 0,5%
- response time 300ms
- isolation input-output: 4000Vef
- self powered from input current for output 0..20mA
- loop-powered for output 4..20mA
- two-state programmable temperature monitor
- compact design, IP 65 protection
- output relay with changeover contact
- Possibility of easy setting of switching value by potentiometer or programmed
- power voltage:
12V / 24V DC ± 25% without galvanic isolation
24V DC ± 10% with galvanic isolation 3kV
230V AC ± 10% (45 - 65 Hz) (transformer)
- isolation strength input / output / power 4kV
- the temperature adjusting element is inside the housing
- It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).
- converter with galvanic isolation 3700Veff
- it is designed for transduction:
- temperature from any thermocouple with linearization and cold junction compensation
- temperature from RTD or resistance from resistance transmitter
- voltage 0-1V DC
- easy programming by AX-USB adapter (AY-USB)
- power supply 8…30V DC
- slim design, DIN 35 rail-mounted, width 12,5mm
- two-state programmable temperature monitor
- compact design, IP 65 protection
- output relay with changeover contact
- Possibility of easy setting of switching value by potentiometer or programmed
- power voltage:
12V / 24V DC ± 25% without galvanic isolation
24V DC ± 10% with galvanic isolation 3kV
230V AC ± 10% (45 - 65 Hz) (transformer)
- isolation strength input / output / power 4kV
- the temperature adjusting element is inside the housing
- It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).
- two-channel programmable converter
- with galvanic isolation 4000Veff input - output - power supply
- inputs are galvanic isolated max. 1000V!
- is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
- communication by RS485 line with master device on baud rate 600..19200Bd
- typically max. 56 transmitters on the line, distance max. 1200m
- communication protocol ASCII or MODBUS-RTU
- 1 measuring input
- 3 outputs
- control for heating as well as cooling
- communication line
- 20 programs with 15 steps
- start of the program with the key
- start of the program with the real-time clock
- observing of the program course
- datalogger, memmory of measured values
- easy operation
- measurements
- measurements DC current or voltage both polarities
- outputs from Pt100 resistance thermometers or J,K thermocouples
- max. input ± 12V or ± 24mA
- yellow-orange 5-digit OLED display
- 2 x alarm contact
- universal power supply
- panel design IP65
- two-state programmable temperature monitor
- compact design, IP 65 protection
- output relay with changeover contact
- Possibility of easy setting of switching value by potentiometer or programmed
- power voltage:
12V / 24V DC ± 25% without galvanic isolation
24V DC ± 10% with galvanic isolation 3kV
230V AC ± 10% (45 - 65 Hz) (transformer)
- isolation strength input / output / power 4kV
- the temperature adjusting element is inside the housing
- It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).
čeština
