Products

• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• inbuilt programmable transmitter PMA300 with 4…20mA output
• power supply by output loop 8…30V DC, ripple max. 0,5V
• any measuring range <-50…+80>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300

• low voltage current transformers
• using in low voltage switchboards up to 2500A
• certified calibration
• customized on request

Continue HERE in new window please
(Czech language only)

(You can see description of sensors after click on Types, detailed tables are below)

Attachment for downloads:
(in TXT format for easy linearization in PC)

• sawing of space
• it can be add for all cable sensors with stem diameter 6mm

• connector DIN43650
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
• temperature range: -30…+90° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• for outdoor use, IP65
• it can be use transmitters
     - PP200 with output 4…20mA
     - PP300 with output 0…10V
     - PPL100 with output ASCII or MODBUS
• power supply by output loop 8…28V ss, ripple max. 0,5V
• any measuring range, min. span 10°C
• accuracy ±0,3% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• cable thermometer Ø 4 .. 8mm for bearing, uninsulated stem
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -60…+350°C (T=c. 10sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ
• Immersion length Y = depth of hole+ 10mm! Spring compressionis max. 20mm.

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• measures and separates a signal from a resistive or semiconductor strain gauge bridge
• allows to measure both polarity input signal
• dielectric strength 4000Vef input - output - power supply
• auxiliary power supply 19-300V DC 90-250V AC
• DIN 35 rail design
• conversion accuracy <0.1%
• time constant approx. 100ms

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• inbuilt programmable transmitter PMA300 with 4…20mA output
• power supply by output loop 8…30V DC, ripple max. 0,5V
• any measuring range <-50…+80>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300

• sensor is built-in to plastic box, wall mounting design
• sensor 1x Pt100A, B, Pt1000, Ni1000 or others
• accuracy according to used sensor

• sensor is built-in to plastic box, wall mounting design
• connecting by three wires (GND, OUT, +Ucc)
• power supply 12…34V DC
• voltage ripple max. 0,5V
• measuring range 0…+50°C (or others)
• output 0…5V
• accuracy +/- 0,3°C

• základní provedení Ø8mm, -25…+200°C (T=cca 10sec) nebo –25…+400°C (T=cca 25sec)
• stonek je možné vyrobit Ø 8 nebo 10mm
• lze osadit převodníky
     - PP200 s výstupem 4…20mA
     - PP300 s výstupem 0…10V   
     - PX300 s výstupem 4-20mA s galvanickým oddělením
     - PPL100 s výstupem ASCII nebo MODBUS
• napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
• libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
• přesnost ±0,5% z rozsahu (max. ±0,25°C)
• ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

• základní provedení: stonek Ø8mm, jímka Ø10mm,
• použití pro -25…+200°C (T=cca 30sec) nebo –25…+400°C (T=cca 50sec)
• výběr ze šroubení: G1/2; M20x1,5; M27x2, G3/4...
• lze osadit převodníky
     - PP200 s výstupem 4…20mA
     - PP300 s výstupem 0…10V
     - PX300 s výstupem 4-20mA s galvanickým oddělením
     - PPL100 s výstupem ASCII nebo MODBUS
• napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
• libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
• přesnost ±0,5% z rozsahu (max. ±0,25°C)
• ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

• převodník je určen do hlavice teploměru rozměr DIN „B“
• uživatelská konfigurace převodníku
• převodník s výstupem 0-10V je určen k převodu signálu z Pt100, Pt1000, Ni100 a Ni1000,

This converter creates data transmission between Modbus RTU and Modbus TCP. It provides long-distance access to MODBUS RTU via ETHERNET.

• configuration via internal website
• galvanic isolation ETHERNET - MODBUS: 1500V
• power supply 8 .. 30V DC
• negative terminal is connected to line RS485
• DIN 35 rail-mounted design

• analog measurement of the input signal
• transducer for measurement DC current or voltage
• directly current measurements up to ±10A, voltage up to ±1000V DC
• accuracy <0,1%
• response time 1ms
• dielectric strength input / output 4kV
• loop powered

Ceny standardních nekonfigurovatelných regulátorů.