Products

• sealed design, stem from insulation material
• -40…+150°C (class „F“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
• -40…+180°C (class „H“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• inbuilt programmable transmitter PMA300 with 4…20mA output
• power supply by output loop 8…30V DC, ripple max. 0,5V
• any measuring range <-50…+80>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300

• low voltage current transformers
• using in low voltage switchboards up to 2500A
• certified calibration
• customized on request

Continue HERE in new window please
(Czech language only)

• connector DIN43650
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
• temperature range: -30…+90° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• for outdoor use, IP65
• it can be use transmitters
     - PP200 with output 4…20mA
     - PP300 with output 0…10V
     - PPL100 with output ASCII or MODBUS
• power supply by output loop 8…28V ss, ripple max. 0,5V
• any measuring range, min. span 10°C
• accuracy ±0,3% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• measures and separates a signal from a resistive or semiconductor strain gauge bridge
• allows to measure both polarity input signal
• dielectric strength 4000Vef input - output - power supply
• auxiliary power supply 19-300V DC 90-250V AC
• DIN 35 rail design
• conversion accuracy <0.1%
• time constant approx. 100ms

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• inbuilt programmable transmitter PMA300 with 4…20mA output
• power supply by output loop 8…30V DC, ripple max. 0,5V
• any measuring range <-50…+80>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300

• sensor is built-in to plastic box, wall mounting design
• sensor 1x Pt100A, B, Pt1000, Ni1000 or others
• accuracy according to used sensor

• sensor is built-in to plastic box, wall mounting design
• connecting by three wires (GND, OUT, +Ucc)
• power supply 12…34V DC
• voltage ripple max. 0,5V
• measuring range 0…+50°C (or others)
• output 0…5V
• accuracy +/- 0,3°C

• connector DIN43650
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• purpose: to sink intro the lock fitting bracket or air conditioning
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• purpose: to sink intro the lock fitting bracket or air conditioning
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 6 or 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec), extended range -30°...+400°C
• used programmable transmitter PMA300 with output 4…20mA
• power supply by output loop 8…28V DC, ripple max. 0,5V
• any measuring range <-50…+400>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -40…+150°C (T=c. 15sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

• sensor Pt100 is covered by teflon shrinkable tube only
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• max. +200°C
• leads are made from stranded wire with PTFE insulation, 2,5m length

• analog measurement of the input signal
• transducer for measurement DC current or voltage
• directly current measurements up to ±10A, voltage up to ±1000V DC
• accuracy <0,1%
• response time 1ms
• dielectric strength input / output 4kV
• loop powered