Products

Total 252 items

First 5 6 7 8 9 10 11 Last

free download

stem from stainless steel diameter 4 or 3mm, min. length 15mm
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
temperature range -10…+400°C
dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

Datasheet Price calculator PT37

from €21.70 excl. VAT

Related products

1 measuring inputs
3 outputs
communication line
10 programs
each program with 15 steps
real time-clock
datalogger with 500 measurements

from €309.40 excl. VAT

loop- powered 4..20mA
input standard unipolar and bipolar signals
one-range converter
response time: 1ms
accuracy 0,2%
dielectric strength input / output 4kV

€108.40 excl. VAT

analog current measurement
rectifier method of measuring the mean value
average value calibrated to RMS of sine wave
frequency range 40 … 1000Hz
conversion accuracy 0,5%
response time 300ms
isolation input-output: 4000Vef
self powered from input current for output 0..20mA
loop-powered for output 4..20mA

€84.30 excl. VAT

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
supply voltage 230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
DIN rail mounting
the temperature adjusting element is inside the housing

€113.10 excl. VAT

converter with galvanic isolation 4000Veff
it is designed for transduction:
   - temperature from any thermocouple with linearization and cold junction compensation
   - temperature from RTD or resistance from resistance transmitter
   - voltage 0-1V DC
easy programming by AX-USB adapter (AY-USB)
power supply 8…30V DC
DIN 35 rail-mounted design

€109.40 excl. VAT

programmable converter with galvanic isolation 4000Veff input - output - power supply
it is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
communication by RS485 line with master device on baud rate 600..19200Bd
typically max. 56 transmitters on the line, distance max. 1200m
communication protocol ASCII or MODBUS-RTU

€126.70 excl. VAT

free download

1 measuring inputs
3 outputs
communication line
3 independent programs
max. 10 steps for program
easy operation

from €309.40 excl. VAT

isolation converter GXN with lightning improved resistance
one-range converter
converter provides additional protection lightning arresters and wire resistors in inputs and outputs
response time: 1ms
accuracy 0,1%
power supply 18VDC for loop-powered transmitter on input
dielectric strength input / output / supply power 4kV
auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

€134.60 excl. VAT

direct analog current measurement up to 100A
current threaded through
rectifier method of measuring the mean value
average value calibrated to RMS of sine wave
frequency range 40 … 1000Hz
conversion accuracy 0,5%
response time 300ms
isolation input-output: 4000Vef
self powered from input current for output 0..20mA
loop-powered for output 4..20mA

€84.30 excl. VAT

2

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€104.50 excl. VAT

converter with galvanic isolation 3700Veff
it is designed for transduction:
   - temperature from any thermocouple with linearization and cold junction compensation
   - temperature from RTD or resistance from resistance transmitter
   - voltage 0-1V DC
easy programming by AX-USB adapter (AY-USB)
power supply 8…30V DC
slim design, DIN 35 rail-mounted, width 12,5mm

€108.90 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€111.80 excl. VAT

two-channel programmable converter
with galvanic isolation 4000Veff input - output - power supply
inputs are galvanic isolated max. 1000V!
is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
communication by RS485 line with master device on baud rate 600..19200Bd
typically max. 56 transmitters on the line, distance max. 1200m
communication protocol ASCII or MODBUS-RTU

€168.90 excl. VAT

GY200-1 GY200-2 GY200-3

free download

1 measuring input
3 outputs
control for heating as well as cooling
communication line
20 programs with 15 steps
start of the program with the key
start of the program with the real-time clock
observing of the program course
datalogger, memmory of measured values
easy operation

from €339.50 excl. VAT

measurements
- measurements DC current or voltage both polarities
- outputs from Pt100 resistance thermometers or J,K thermocouples
- max. input ± 12V or ± 24mA
yellow-orange 5-digit OLED display
2 x alarm contact
universal power supply
panel design IP65

upon request

First 5 6 7 8 9 10 11 Last