Products

• low voltage current transformers
• using in low voltage switchboards up to 2500A
• certified calibration
• customized on request

Continue HERE in new window please
(Czech language only)

• Thermometers has the same parameters as common design with aluminium connection head „B“:
• Without transmitter (analogy PT50, PT50H, PT50J, PT55):
     - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
     - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
     - it can be use transmitters
        • PP200 with output 4…20mA
        • PP300 with output 0…10V  
        • PX300 with output 4…20mA with galvanic isolation
        • PPL100 with output ASCII or MODBUS
     - any measuring range <-50…+80>°C, min. span 50°C
     - another parameters are shown in the datasheet of used transmitter
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

• thermowells
• adjustable threads
• welded-on pieces
• holder for air conditioning

• inbuilt transmitter PP200 powered from output current loop
• it is programmable for sensors Pt100, Pt1000, Ni 100, Ni1000
• current output 4-20mA
• programmable range, min. span 10°C
• accuracy ±(0,07%+0,1°C)
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PP300 with power supply 12-30V DC
• it is designed for:
     - resistance from resistance transmitter (potentiometer) 0..100Ω, 0..1kΩ and 0..10kΩ
     - voltage 0-10V DC, thermistors by request
• voltage output 0-10V
• programmable range, min. span 10°C
• accuracy ±(0,07%+0,1°C)
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PX300 powered from output current loop
• galvanic isolation input - output - power supply: 1200Veff
• transmitter with 4-20mA output is designed for:
     - temperature from any thermocouple with linearization and cold junction compensation
     - resistance from resistance transmitter (potentiometer)
     - thermistors, KTY, NTC e.t.c.
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PPL100
• it converts temperature from Pt100, Pt1000 or Ni1000 sensor to digital otput RS485
• transmitter has auto-recognize for Pt100 or Pt1000 sensors
• we can set it for other input signals too
• communication by RS485 line with master device on baud rate 600..19200Bd
• communication protocol ASCII or MODBUS-RTU

• maximum operating voltage: 3V
• input signal: resistance connected 3W
• serial resistance: 8,2 ohm
• voltage protection level core-PE at 10kA (8/20 μs): 300V
• voltage protection level core-core at 100A (8/20 μs): 12V

• it protect 2 wire opposite overvoltage rail-rail and rail-ground
• DC Breakdown (500V/s): 250V =
• surge current (8/20uSec): max. 20kA
• DIN 35 rail-mounted design

(You can see description of sensors after click on Types, detailed tables are below)

Attachment for downloads:
(in TXT format for easy linearization in PC)

• sawing of space
• it can be add for all cable sensors with stem diameter 6mm

• connector DIN43650
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
• temperature range: -30…+90° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• for outdoor use, IP65
• it can be use transmitters
     - PP200 with output 4…20mA
     - PP300 with output 0…10V
     - PPL100 with output ASCII or MODBUS
• power supply by output loop 8…28V ss, ripple max. 0,5V
• any measuring range, min. span 10°C
• accuracy ±0,3% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• cable thermometer Ø 4 .. 8mm for bearing, uninsulated stem
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -60…+350°C (T=c. 10sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ
• Immersion length Y = depth of hole+ 10mm! Spring compressionis max. 20mm.

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• measures and separates a signal from a resistive or semiconductor strain gauge bridge
• allows to measure both polarity input signal
• dielectric strength 4000Vef input - output - power supply
• auxiliary power supply 19-300V DC 90-250V AC
• DIN 35 rail design
• conversion accuracy <0.1%
• time constant approx. 100ms

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• inbuilt programmable transmitter PMA300 with 4…20mA output
• power supply by output loop 8…30V DC, ripple max. 0,5V
• any measuring range <-50…+80>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• cable thermometer Ø 6mm for bearing, with insulated stem
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -60…+200°C (T=c. 10sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ
• Immersion length Y = depth of hole+ 10mm! Spring compressionis max. 20mm.

• kabel v provedení PUR s délkou 5m
• ve 4w provedení
• do teploty 80°C
•