čeština
Bočníky
Shunt . Accuracy class 0.5
on request
Products
ISOL200/DC
ISOLATED TRANSDUCER WITH POWER SUPPLY AND ACTIVE OUTPUT
- digital processing of the input signal
- transducer for measurement DC current or voltage
- allows unipolar and bipolar input and output signal
- directly current measurements up to ±10A, voltage up to ±1000V DC
- ability to measure absolute values and inverted signal
- conversion accuracy <0,1%
- response time 50ms
- dielectric strength input / output / supply power 4kV
- universal power supply 19 – 300V DC & 90 – 250V AC
€115.70 excl. VAT
ISOL200
ISOLATING CONVERTER FOR UNIPOLAR AND BIPOLAR SIGNALS WITH SWITCHABLE CALIBRATED RANGES
- 24 calibrated ranges
- isolation unipolar and bipolar signals
- setting ranges by slid switches DIP on the board
- digital processing and transfer A/D and D/A
- response time: < 50ms
- accuracy 0,1%
- power supply 18VDC for loop-powered transmitter on input
- dielectric strength input / output / supply power 4kV
- auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC
€112.40 excl. VAT
PD14-1
Programming Adapter for Displays
- programming adapter for Rawet R24 display and Lumel N20, N24, N25 ... and others
- programming software for RawetStudio2 and LPConfig
€54.20 excl. VAT
ACN
AC TRUE RMS CURRENT OR VOLTAGE TRANSDUCER
- analog measurement
- true RMS value of current or voltage
- signal processing with crest factor up 10
- frequency range 40 … 1000Hz
- conversion accuracy 0,5%
- response time 300ms
- isolation input-output-power supply: 4000Vef
- universal power supply 19 – 300V DC & 90 – 250V AC
€123.10 excl. VAT
free download
- measures the product of two input signals 0/4-20mA
- display unit in Watts
- output of up to 4 relays, analog output, RS485
- 4-digit display (digit height 20mm)
- LED display color red or green
- power supply 19..300VDC & 90..250VAC
- panel design
- to display the measured value
- monitoring of exceeding the set value
from
€94.90 excl. VAT
2
PT11
Temperature sensors for outdoor use, plastic connection head with nickel-coated brass stem, IP65.
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
- for outdoor use, IP65, -50…+100°C
from
€30.20 excl. VAT
PHXC-BOX
Industrial pH transmitter, IP56
- It provide a voltage corresponding pH value in range 0..14
- optional output 4..20mA, 0..10V or MODBUS
- dielectric strength input / output 1,5 kV
- wall-mounted design, plastic box IP65
- 2-wire temperature compensation Pt, Ni
- calibration in 2 points 10/4pH and 7pH
€151.70 excl. VAT
PTP05
Sensor is designed for surface temperature measurement on pipes. for outdoor use (IP65), -25…+120°C, output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
- mounting on pipe with diameter 40-60mm by metallic cable tie or by stainless steel zip ties for any diameter
- it can be use transmitters
- PP200 with output 4…20mA
- PP300 with output 0…10V
- PPL100 with output ASCII or MODBUS - power supply by output loop 8…28V ss, ripple max. 0,5V
- any measuring range <-50…+80>°C, min. span 50°C
- accuracy ±0,5% from span (max. ±0,25°C)
- another parameters are shown in the datasheet of used transmitter
€85.10 excl. VAT
PT30 max. 350°C
Temperature sensor into thermowells or onto pipes, cable with insulation from fiberglass is wired in thermometers body. Stem is made from stainless steel 17248, optional dimensions and design.
- basic design: 6x50mm Pt100/B with cable 4w 1m
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
- temperature range -10…+350°C with cable BIMV-CNTEVS (T=c. 7sec)
- dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)
from
€23.30 excl. VAT
PT31 350°C
Temperature sensor for screwing into thermowells or welded-on pieces, cable with insulation from fiberglass is wired in thermometers body. Stem is made from stainless steel 17248, optional dimensions and design.
- screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
- temperature range -10…+350°C with cable BIMV-CNTEVS (T=c. 7sec)
- dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)
from
€28.40 excl. VAT
SIXISOL200/DC
ISOLATED TRANSDUCER WITH POWER SUPPLY AND ACTIVE OUTPUT
- digital processing of the input signal
- transducer for measurement DC current or voltage
- allows unipolar and bipolar input and output signal
- directly current measurements up to ±5A, voltage up to ±500V DC
- ability to measure absolute values and inverted signal
- conversion accuracy <0,1%
- response time 1ms, per order up to 300ms
- dielectric strength input / output / supply power 4kV
- universal power supply 19 – 300V DC & 90 – 250V AC
€120.30 excl. VAT
SIXISOL200
ISOLATING CONVERTER FOR UNIPOLAR AND BIPOLAR SIGNALS WITH SWITCHABLE CALIBRATED RANGES
- 24 calibrated ranges
- isolation unipolar and bipolar signals
- setting ranges by slid switches DIP on the board
- digital processing and transfer A/D and D/A
- response time: 1ms, adjustable to 100ms by switch
- accuracy 0,1%
- power supply 18VDC for loop-powered transmitter on input
- dielectric strength input / output & supply power 4kV
- auxiliary power supply 24VDC ± 25%
€120.30 excl. VAT
- transmitter is mounted in a connection head DIN "B" dimension or any box
- galvanic isolation input - output - power supply: 1200Vef
- easy programming by AX-USB adapter (AY-USB) without power supply
- Transmitter with 4..20mA ouput is designed for:
- any thermocouple with linearization and cold junction compensation
- any RTD sensor or resistance transmitter
- thermistors, KTY, NTC..
€99.10 excl. VAT
pH2
Glass electrodes for measuring pH
- pH range: 0..13
- working temperature 0..+70°C
- zero point: pH = 7
- max. pressure: 3 bar
- various sizes
From
€86.20 excl. VAT
6
PT06
In stock
Snímač s pevně připojeným kabelem pro měření povrchové teploty potrubí. Rozsah teplot -40…+200°C.
- určen pro měření porvchové teploty potrubí a nádob
- montáž se provádí pomocí stahovacího pásku
- lze osadit Pt100/A, B, dvou až čtyřvodičové zapojení, dvojité čidlo, Pt1000, Ni1000, KTY, PTC, termočlánky…aj.
- přesnost závisá na typu použitého čidla
from
€21.40 excl. VAT
2
- with auxiliary power supply
- transducer for measurement DC current or voltage
- allows unipolar and bipolar input and output signal
- directly current measurements up to ±10A DC, voltage up to ±1500V DC
- ability to measure absolute values and inverted signal
- conversion accuracy <0,1%
- response time 1ms, for order up to 300ms
- dielectric strength input / output / supply power 5kVrms
- universal power supply 16 – 300V DC & 90 – 250V AC
- rated impuls voltage Uni: 8kV
- clearances and creepage distances min. 8mm
- designed for DIN 35 rail mounting
€140.10 excl. VAT
PT30 IP68
Temperature sensor into thermowells or onto pipes, cable is wired in thermometers body, plastic bushing increases water-proof and bend resistance. Stem is made from stainless steel 17248, optional dimensions and design.
- basic design: 6x50mm Pt100/B with cable 4w 1m
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
- temperature range -30…+80°C with cable PVC IP68 (T=c. 7sec)
- dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)
from
€24.10 excl. VAT
PT31 IP68
Temperature sensor for screwing into thermowells or welded-on pieces, cable is wired in thermometers body, plastic bushing increases water-proof and bend resistance. Stem is made from stainless steel 17248, optional dimensions and design.
- screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
- it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
- temperature range -30…+80°C with PVC cable IP68 (T=c. 7sec)
- dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)
from
€26.60 excl. VAT
