Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Temperature sensors

Total 63 items

PT33

In stock
Flat design for stator slot.
  • sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
  • -40…+180°C (class „H“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €16.50 excl. VAT

PT38 80°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -30…+80°C with PVC cable
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €25.40 excl. VAT

PT38 200°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, PTC, thermocouples…
  • temperature range -40…+200°C with cable MCBE-AFEP
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €25.40 excl. VAT

PT38 350°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
  • temperature range -10…+350°C with cable BIMV-CNTEVS
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €25.40 excl. VAT

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €47.50 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €95.10 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
    • it can be use transmitters
         - PP200 with output 4…20mA
         - PP300 with output 0…10V
         - PX300 with output 4…20mA with galvanic isolation
  •    - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €88.30 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €49.90 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €95.70 excl. VAT

PT55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €43.70 excl. VAT

PTP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €88.30 excl. VAT

PT50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €41.10 excl. VAT

PTP50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €85.80 excl. VAT

PT50N

Temperature sensor with stainless head, proof design, IP68. Designed for chemicals and food industry.
  • Thermometers has the same parameters as common design with aluminium connection head „B“:
  • Without transmitter (analogy PT50, PT50H, PT50J, PT55):
       - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
       - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
       - it can be use transmitters
          • PP200 with output 4…20mA
          • PP300 with output 0…10V  
          • PX300 with output 4…20mA with galvanic isolation
          • PPL100 with output ASCII or MODBUS
       - any measuring range <-50…+80>°C, min. span 50°C
       - another parameters are shown in the datasheet of used transmitter
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

From €76.50 excl. VAT

PTxx-R

new
Cable output with 90°angle
  • sawing of space
  • it can be add for all cable sensors with stem diameter 6mm

+ €2.70 excl. VAT

PT50JV

Snímač s vložkou a jímkou k zašroubování do stěny potrubí nebo nádob. Hliníková hlavice s nerezovým stonkem, IP56.
  • základní provedení: stonek Ø8mm, jímka Ø10mm
  • rozsah měření -25…+200°C (T=cca 30sec) nebo –25…+400°C (T=cca 50sec)
  • výběr ze šroubení: G1/2; M20x1,5; M27x2, G3/4....
  • lze osadit Pt100/A, B, dvou až čtyřvodičovém zapojení, dvojité čidlo, Pt1000, Ni1000, KTY, PTC, termočlánky…
  • přesnost závisá na typu použitého čidla

from €102.30 excl. VAT

PTP50V

Snímač s vložkou k zašroubování do jímek nebo návarků. Hliníková hlavice s nerezovým stonkem, IP56. Výstup 4…20mA, 0…10V nebo RS485 (ASCII nebo MODBUS).
  • základní provedení Ø8mm, -25…+200°C (T=cca 10sec) nebo –25…+400°C (T=cca 25sec)
  • výběr ze šroubení: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4...
  • stonek je možné vyrobit Ø 8 nebo 10mm
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0-10V
       - PX300 s výstupem 4-20mA  s galvanickým oddělením
       - PPL100 s výstupem ASCII nebo MODBUS
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
  • přesnost ±0,5% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €103.70 excl. VAT

PTP50HV

Snímač s vložkou bez šroubení pro montáž do jímky nebo pomocí kleštinového šroubení. Hliníková hlavice s nerezovým stonkem, IP56. Výstup 4…20mA, 0…10V nebo RS485 (ASCII nebo MODBUS).
  • základní provedení Ø8mm, -25…+200°C (T=cca 10sec) nebo –25…+400°C (T=cca 25sec)
  • stonek je možné vyrobit Ø 8 nebo 10mm
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V   
       - PX300 s výstupem 4-20mA s galvanickým oddělením
       - PPL100 s výstupem ASCII nebo MODBUS
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
  • přesnost ±0,5% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €101.70 excl. VAT

PTP50JV

Snímač s vložkou a jímkou k zašroubování do stěny potrubí nebo nádob. Hliníková hlavice s nerezovým stonkem, IP56. Výstup 4…20mA, 0…10V nebo RS485 (ASCII nebo MODBUS).
  • základní provedení: stonek Ø8mm, jímka Ø10mm,
  • použití pro -25…+200°C (T=cca 30sec) nebo –25…+400°C (T=cca 50sec)
  • výběr ze šroubení: G1/2; M20x1,5; M27x2, G3/4...
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PX300 s výstupem 4-20mA s galvanickým oddělením
       - PPL100 s výstupem ASCII nebo MODBUS
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
  • přesnost ±0,5% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €111.40 excl. VAT