Products

• sealed design, stem from insulation material
• -40…+150°C (class „F“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
• -40…+180°C (class „H“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, PTC, thermocouples…
• temperature range -40…+200°C with cable MCBE-AFEP
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
• temperature range -10…+350°C with cable BIMV-CNTEVS
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

• supply voltage: 230V AC ± 10% (45 – 65 Hz)
• output voltage: 24V DC, ±5%
• output power capacity: 0.5VA (22mA)
• protection: transformer with thermal fuse + electronic cut-out

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

• supply voltage: 230V AC ± 10% (45 – 65 Hz)
• output voltage: 24V DC, ±5%
• output power capacity: 5VA (200mA)
• protection: transformer with resettable thermal fuse

• measurement frequency in wide range 0..120kHz
• unipolar and bipolar input signl
• conversion accuracy  0,2%
• response time 300ms
• isolation input-output-power supply: 4000Vef
• universal power supply 19 – 300V DC & 90 – 250V AC

• Thermometers has the same parameters as common design with aluminium connection head „B“:
• Without transmitter (analogy PT50, PT50H, PT50J, PT55):
     - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
     - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
     - it can be use transmitters
        • PP200 with output 4…20mA
        • PP300 with output 0…10V  
        • PX300 with output 4…20mA with galvanic isolation
        • PPL100 with output ASCII or MODBUS
     - any measuring range <-50…+80>°C, min. span 50°C
     - another parameters are shown in the datasheet of used transmitter
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

• thermowells
• adjustable threads
• welded-on pieces
• holder for air conditioning

• inbuilt transmitter PP200 powered from output current loop
• it is programmable for sensors Pt100, Pt1000, Ni 100, Ni1000
• current output 4-20mA
• programmable range, min. span 10°C
• accuracy ±(0,07%+0,1°C)
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PP300 with power supply 12-30V DC
• it is designed for:
     - resistance from resistance transmitter (potentiometer) 0..100Ω, 0..1kΩ and 0..10kΩ
     - voltage 0-10V DC, thermistors by request
• voltage output 0-10V
• programmable range, min. span 10°C
• accuracy ±(0,07%+0,1°C)
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PX300 powered from output current loop
• galvanic isolation input - output - power supply: 1200Veff
• transmitter with 4-20mA output is designed for:
     - temperature from any thermocouple with linearization and cold junction compensation
     - resistance from resistance transmitter (potentiometer)
     - thermistors, KTY, NTC e.t.c.
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PPL100
• it converts temperature from Pt100, Pt1000 or Ni1000 sensor to digital otput RS485
• transmitter has auto-recognize for Pt100 or Pt1000 sensors
• we can set it for other input signals too
• communication by RS485 line with master device on baud rate 600..19200Bd
• communication protocol ASCII or MODBUS-RTU

• maximum operating voltage: 3V
• input signal: resistance connected 3W
• serial resistance: 8,2 ohm
• voltage protection level core-PE at 10kA (8/20 μs): 300V
• voltage protection level core-core at 100A (8/20 μs): 12V

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• purpose: to sink intro the lock fitting bracket or air conditioning
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 6 or 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec), extended range -30°...+400°C
• used programmable transmitter PMA300 with output 4…20mA
• power supply by output loop 8…28V DC, ripple max. 0,5V
• any measuring range <-50…+400>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -40…+150°C (T=c. 15sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

• sensor Pt100 is covered by teflon shrinkable tube only
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• max. +200°C
• leads are made from stranded wire with PTFE insulation, 2,5m length